L Shape White PVC Waterproof Shower Wall Panel Trim 2400mm x 10mm

The L-Shape White PVC Waterproof Shower Wall Panel Trim (2400mm x 10mm) is a versatile finishing profile used primarily to hide exposed edges and seal corners in bathroom installations. Because it is an "L" shape (also known as an angle trim), it can be used for both internal and external corners, or as an end cap to provide a clean, professional finish to a run of panels.

Key Specifications

• Length: 2400mm (2.4 metres) – designed to match the standard height of most shower wall panels.

• Compatibility: Specifically sized for 10mm thick wall panels.

• Material: High-quality, rigid PVC.

• Finish: Gloss White (matches standard white gloss wall panels).

• Face Size: Usually measures approximately 25mm x 25mm (providing a wide enough "lip" to cover cut edges).

Common Uses

1. External Corners: Wrapping around a corner where two panels meet at a 90-degree outward angle.

2. Window Reveals: Framing around windows to hide the raw, honeycomb-cut edge of the PVC panel.

3. End Caps: Used at the end of a wall run to provide a neat "wrap-around" finish where the panel meets a door frame or painted wall.
4. Boxing In: Ideal for covering the edges of timber or MDF frames used to hide pipework.

Features & Benefits

• 100% Waterproof: Being PVC, it will not rot, warp, or rust when exposed to direct water in a shower or wet room.

• Mould Resistant: Unlike grout, the smooth PVC surface is easy to wipe clean and prevents the buildup of mould and mildew.
• Easy to Cut: Can be easily trimmed to size using a fine-toothed hacksaw or a mitre block for precise 45-degree corner joints.
• Hygienic Finish: Creates a seamless transition between surfaces, ensuring there are no deep crevices for bacteria to hide.

Installation Tips

• Sealant: Always apply a bead of high-quality, anti-mould silicone inside the trim before sliding it onto the panel. This ensures a 100% watertight seal.

• Fixing: The trim can be secured using panel adhesive, or by "pinning" it to the wall/battens with small screws or staples through the back flange (which will then be hidden by the panel).

• Protective Film: Most trims come with a thin plastic film to protect the white gloss finish during transit; remember to peel this off only after installation is complete.